Meshtastic® is a project that enables you to use inexpensive LoRa radios as a long range off-grid communication platform in areas without existing or reliable communications infrastructure. This project is 100% community driven and open source!
Operating on 868 MHz using LoRa devices, it’s ideal for off-grid comms in remote areas, disaster zones etc. It creates resilient networks, with each device acting as a node and router, transmitting data directly between devices for enhanced privacy and security.
Explore all RAK Wireless Sensors and Accessories
Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided – use at your own risk.
Meshtastic
Showing 1–20 of 43 resultsSorted by latest
-
Meshtastic, RAK Wireless
RAK WisMesh Repeater Mini
WisMesh Repeater Mini is a ready-to-deploy Meshtastic solar repeater built to extend LoRa mesh coverage in outdoor and off-grid locations. It combines a pre-flashed RAK4631 LoRa module, integrated solar charging, a 3200 mAh battery, and an IP67 enclosure for reliable field use. Ideal for emergency comms, farms, remote sites, and rooftop installs where you need dependable mesh coverage without permanent power.
SKU: RAK-RPMINI -
LoRa 868 MHz Antennas, Meshtastic, Professional Communications
TI18 “Butterfly” 3.2dBi 868 MHz LoRa Antenna
LoRa 868 MHz Antennas, Meshtastic, Professional CommunicationsTI18 “Butterfly” 3.2dBi 868 MHz LoRa Antenna
The TI18 “Butterfly” 3.2dBi 868 MHz LoRa Antenna is a high-efficiency dipole terminal antenna with a hinged SMA male connector for fast alignment. Its butterfly-shaped radiation pattern (instead of a typical dipole “dumbbell” E-plane) helps direct more energy toward remote devices when antennas sit at different heights—ideal for multi-level urban deployments and nodes.
SKU: TG-TI18 -
LoRa 868 MHz Antennas, Meshtastic, Professional Communications
TI84 Hinged Dipole Antenna 868 MHz, IP67
LoRa 868 MHz Antennas, Meshtastic, Professional CommunicationsTI84 Hinged Dipole Antenna 868 MHz, IP67
The TI84 Hinged Dipole Antenna is a high-performance 868 MHz terminal-mount dipole antenna for EU 868 / Meshtastic / LoRaWAN devices that need reliable range indoors or outdoors. The hinged SMA male connector lets you angle the antenna for best signal, and the IP67 enclosure protects against dust and water. This is a professional grade antenna backed by a full datasheet!
SKU: TG-TI84 -
LoRa 868 MHz Antennas, Meshtastic
ALFA AOA-868 LoRa Antenna
The AOA-868-5ACM is a compact outdoor omni-directional antenna tuned for 863–870 MHz, making it a strong upgrade for Meshtastic nodes when you want better range. Built with a standard N-Male connector, it’s ideal for nodes rooftops, masts, sheds, or balcony installs.
SKU: AOA-868 -
Meshtastic, Professional Communications, RAK Wireless
RAK WisMesh Repeater, PRO
Extend your Meshtastic LoRa mesh coverage off-grid on EU868. The RAK WisMesh Repeater Solar Kit (RAK10721) is a rugged IP67 outdoor Meshtastic repeater built on the proven RAK4631 (nRF52840 + SX1262) and powered by a 10 W solar panel with Solar Battery Lite for long-term remote installs. Ideal for hilltops, cabins, masts, and permanent relay sites across Europe where mains power isn’t available.
SKU: RAKREP -
Meshtastic, Professional Communications, RAK Wireless
RAK WisMesh Pocket V2
WisMesh Pocket V2 is a ready-to-use Meshtastic LoRa mesh handheld, pre-flashed and built for reliable off-grid messaging when cellular or internet isn’t available. Featuring an SMA antenna connector, 1.3” OLED display, integrated GNSS, and an accelerometer, it’s ideal for preparedness, field use, and technical experimentation—delivered in a rugged enclosure (Green, Black, or White) with a 3200mAh rechargeable battery.
EU 868 MHz version.
SKU: RAKMPOC2 -
Heltec Automation, Meshtastic, Professional Communications
Heltec MeshTower, Solar Powered LoRa Node
Heltec MeshTower is a rugged, solar-powered outdoor communication node built on MeshSolar technology. It combines an 18 V / 10 W solar panel, a high-capacity Li-ion battery pack and an nRF52840 + SX1262 LoRa platform in a single weatherproof enclosure – ideal for Meshtastic networks, remote sensing and off-grid installations.
SKU: HTMTWR -
Heltec Automation, Meshtastic
HELTEC Wireless Tracker GPS LoRa Node
The Heltec Wireless Tracker is an ESP32-S3 based LoRa and GNSS development kit designed for
Meshtastic, LoRaWAN and custom GPS tracking projects. With an integrated SX1262 LoRa radio, UC6580 GNSS
chipset and optional LCD, it’s ideal for building compact trackers for bikes, vehicles, pets, gear and
outdoor adventures.SKU: HTTRCK -
Heltec Automation, Meshtastic, Professional Communications
MeshPocket Qi2 Meshtastic Node & Power Bank
Heltec Automation, Meshtastic, Professional CommunicationsMeshPocket Qi2 Meshtastic Node & Power Bank
MeshPocket is a compact Qi2 magnetic power bank with a built-in Meshtastic-ready LoRa node. Powered by the nRF52840 + SX1262 combo and a 2.13″ e-ink display, it keeps your phone charged and your mesh messages flowing – whether you’re commuting, hiking, or operating off-grid.
SKU: HTMP -
Heltec Automation, Meshtastic
HELTEC WiFi LoRa 32 (V4)
The Heltec WiFi LoRa 32 V4 is the latest ESP32-S3 based LoRa development board, offering major improvements over the previous WiFi LoRa 32 V3. With upgraded 28 dBm LoRa output, GNSS expansion, solar charging support, enhanced RF performance and 16 MB Flash, it is ideal for IoT, LoRaWAN, trackers, and Meshtastic projects.
SKU: HTV4 -
Meshtastic, RAK Wireless
RAK WisBlock Starter Kit 433 MHz
The WisBlock Starter Kit is a bundle of WisBlock Base RAK19007 and Core RAK4631 from RAKWireless. By prioritising power efficiency and management, it is the perfect choice for solar powered off grid Meshtastic nodes, routers and repeaters.
EU 433 MHz version!
SKU: RAKWIS-433 -
-
Antenna Accessories, Coax Cable, Meshtastic
LMR-200 Coax Cable 3m N Male to SMA Male
Premium 3 m LMR-200 coaxial cable with N Male to SMA Male connectors. Ideal for Meshtastic nodes and RAK fiberglass antennas. Low-loss and durable, it ensures reliable performance for both outdoor and indoor installations.
SKU: L2NMSM -
Meshtastic, Professional Communications, RAK Wireless
WisMesh Tag
The new WisMesh Tag – ultra-slim, weatherproof Meshtastic node with longer battery life. Easy to carry, good antenna with a great range and perfect for carry an undetected node. The Tag gets great user feedback!
EU 868 MHz version!
SKU: RAK-TAG -
-
Heltec Automation, Meshtastic
HELTEC WiFi LoRa 32(V3) 433-510 MHz
Build a reliable Meshtastic node with the Heltec WiFi LoRa 32 V3 – a compact board featuring the ESP32, SX1262 LoRa module, and integrated OLED display. Perfect for setting up low-power, long-range mesh network without cellular or internet access.
To build a complete node, add a Bender Case for Heltec V3 (includes all wiring, battery holder and antenna connector).
SKU: HTV3-433 -
-
-
