Shop Categories
Shop
Showing 1–20 of 98 results
-
-
-
Receiver Accessories
Bandpass Filter Kit for ColibriDDC
Plug in HF octave bandpass filter for ColibriDDC with +10 dB preamp and -20 dB attenuator will improve this already great SDR making it superior in situations when out of band signals needs to be attenuated.
This product is special order, allow 3-4 weeks for delivery.SKU: ColibriDDC-BPF-Kit -
-
-
-
Expert Electronics, Receivers
ColibriDDC HF SDR Recveiver
ColibriDDC is a small sized direct sampling SDR receiver designed to work on HF frequencies from 0.09 to 60 MHz. With the help of external filters ColibriDDC is capable to receive frequencies up to 800 MHz. It is controlled via LAN or can be connected to a Raspberry Pi3 to be remote controlled over the internet.
Scroll down for more information and a video presentation of ColibriDDC.
NEW! Andrew Barron ZL3DW review (English) >>
Radiouser magazine review (English) >>
Funk Amateur magazine review (German) >>
Fernando Duarte review (English) >>SKU: CDDC -
Expert Electronics, Receivers
ColibriDDC with Band Pass Filter
The ColibriDDC is a compact SDR receiver covering 0.09 to 60 MHz and with external filters capable of receiving frequencies up to 800 MHz. Direct digital signal sampling using a high speed digital to analog converter results in very high performance from a light and small package. The receiver is controlled via LAN and perfect for remote control over a local network or over internet using the RPI Server.
This version of ColibriDDC comes with the optional HF octave Band Pass Filter installed. In addition the BPF board also features a +10 dB preamp plus a -20 dB attenuator. The BPF option will improve the already great ColibriDDC making it a top performing receiver for situations when big signals limits the use of wideband receivers.
Scroll down for more information and a video presentation of ColibriDDC.
NEW! Andrew Barron ZL3DW review (English) >>
Radiouser magazine review (English) >>
Funk Amateur magazine review (German) >>
Fernando Duarte review (English) >>SKU: CDDC-BPF -
Expert Electronics, Receivers
ColibriNANO USB SDR Receiver 0.1 to 55 MHz
ColibriNano takes USB dongle SDR receivers to a new level. This is a direct sampling, high quality SDR receiver covering 100 kHz to 55 MHz with up to 3 MHz sample rate in a sturdy aluminium USB stick.
- ARRL/QST Review by VA2PV
- Review by Adam Farson, VA70J/AB40
- Review on the Fenu-Radio
- Video review by Z33T Mile Kokotov
SKU: ColibriNANO -
Antennas, RX Antennas, RX Loops
Cross Country Wireless HF Active RX Loop 200 kHz to 70 MHz
The Cross Country Wireless HF Active Loop Antenna is a compact receiving loop with a frequency range of 200 kHz to 70 MHz with extended coverage up to 148 MHz. The antenna can be for all LF, MW and HF professional monitoring and short wave listening. It can also be used for VHF FM reception and will give useful VHF airband reception when mounted outdoors.
SKU: n/a -
Low Band Systems, RX Antenna Switches, RX Antennas
DS4R RX Antenna Switch with Preamp & High Pass Filter
Low Band Systems, RX Antenna Switches, RX AntennasDS4R RX Antenna Switch with Preamp & High Pass Filter
The DS4R RX antenna switch from Low Band System with preamp and high pass filter designed to be used with up to four single direction RX antennas like Beverages, Pennants, Flags, DHDL etc.
Delivery time on this item is 3-4 weeks.
SKU: n/a -
Controllers, Receiver Accessories, Transceiver Accessories
E-Coder PLUS Controller
The E-Coder PLUS is identical to the E-Coder except that the VFO optical sensor produce 1024 pulses per revolution compared to 200 pulses per revolution for the standard E-Coder EP. This allowed for more precise fine-tuning when using maximum zoom in the spectrum.
SKU: E-Coder-Plus
