RX Antennas
Showing all 12 resultsSorted by latest
-
DX Engineering, QRM/QRN Reduction, Receiver Accessories, RX Antenna Switches, Transceiver Accessories
DX Engineering NCC-2 RX Antenna Phasing System
DX Engineering, QRM/QRN Reduction, Receiver Accessories, RX Antenna Switches, Transceiver AccessoriesDX Engineering NCC-2 RX Antenna Phasing System
DX Engineering NCC-2 Receive Antenna Phasing System — high-dynamic-range, two-channel receive-only phasing controller for HF (≈300 kHz–30 MHz). Precisely combine a main antenna with an auxiliary/noise antenna and adjust amplitude + 360° phase to cancel local noise and boost desired signals. Includes RTR RX/TX interface, module/filter slots, and Bias-T for active RX antennas.
- HF RX ≈300 kHz–30 MHz
- 360° phase + variable gain
- RTR RX/TX relay, Bias-T
- Filter & preamp module slots
- Ideal for 160/80/40 m DX & contesting
SKU: DXE-NCC-2 -
Active RX Antennas, DX Engineering, Receiver Accessories
DX Engineering AVA-3 Active Matching Unit
DX Engineering AVA-3 Active Matching Unit (DXE-AVA-3) — low-noise, wideband receive buffer for short elements (≈1.8–7.3 m). 40 kHz–30 MHz coverage, +39 dBm TOI, jumper-selectable gain (−6/0/+6 dB), 75 Ω F-connectors. Power via built-in Bias-T or Direct DC.
SKU: DXE-AVA-3 -
Active RX Antennas, DX Engineering, Receiver Accessories, Transceiver Accessories
DX Engineering RPA-2 Modular Receive Preamplifier
Active RX Antennas, DX Engineering, Receiver Accessories, Transceiver AccessoriesDX Engineering RPA-2 Modular Receive Preamplifier
DX Engineering RPA-2 Modular Receive Preamplifier is a high-performance, low-noise inline preamp for 0.3–35 MHz (300 kHz–35 MHz). Optimized for SWL and amateur radio receive systems, the RPA-2 delivers ~16 dB gain, excellent linearity, and a modular plug-in slot for accessories like input protection or impedance transformation. SKU: DXE-RPA-2 -
Active RX Antennas, DX Engineering, Receiver Accessories
DX Engineering RSEAV-1 RX Active Vertical Antenna
Active RX Antennas, DX Engineering, Receiver AccessoriesDX Engineering RSEAV-1 RX Active Vertical Antenna
Wideband, low-noise receive-only vertical antenna covering ~40 kHz to 30 MHz. Ideal for MW/LW, LF/VLF monitoring and HF weak-signal reception, diversity RX, DXing, and contest receive arrays. Includes the new DXE-AVA-3 Active Matching Unit for superior strong-signal handling and low noise.
SKU: DXE-RSEAV-1 -
Beverage/BOG Antennas, Low Band Systems, RX Antennas
Reversible BOG Antenna Matching Set
Two-direction Beverage On Ground (BOG) feed-point transformer and termination transformer set, for antennas made of coax cable. Available for both 50 or 75 ohm feed line systems.
SKU: reversible-bog-antenna-matching-set -
Chokes & Transformers, Low Band Systems, RFI Prevention, RX Antennas
Receive Common Mode Choke
Common Mode Chokes from Low Band Systems removes unwanted noise and signals from the feedline of your receive antenna. It is a “Must have” to keep your radio’s noise floor low and quiet, especially on 160, 80 and 40 meter bands!
SKU: rx-common-mode-choke -
-
-
-
Band Pass Filters, Low Band Systems, RX Antenna Switches, RX Antennas
LBSuper III RX Ant Switch, BPF & Preamp
Band Pass Filters, Low Band Systems, RX Antenna Switches, RX AntennasLBSuper III RX Ant Switch, BPF & Preamp
This receive antenna switch with two 12dB preamps and band pass filters for 160, 80 and 40 meter is the heart and brains of a complete receive antenna system for the low band DXer.
SKU: LBSuper_III
