USB to Parallel Adapter for the FLEX-6000 series
In stock (can be backordered)
Share this:
Genuine FTDI interface cable plugs into the USB port on the back of the FLEX-6000 series radios to connect to devices requiring a parallel connection (BIT).
75.59 $
In stock (can be backordered)
The cable is terminated by ten individual wires with single pole connectors which can be interfaced to a male header. Cable signals are compliant with CMOS logic at 3.3 volts. The cable is 0.5M is long. This functionality requires SmartSDR version 1.10 or later.
Please review some of the hardware that this can be used with at: https://www.flexradio.com/downloads/usb-cable-interface-guide-pdf
| Weight | 0.1 kg |
|---|---|
| Dimensions | 12 × 8 × 2 cm |
Related products
-
Expert Electronics, Controllers, Receiver Accessories, Transceiver Accessories
E-Coder PLUS Controller
Expert Electronics, Controllers, Receiver Accessories, Transceiver AccessoriesE-Coder PLUS Controller
The E-Coder PLUS is identical to the E-Coder except that the VFO optical sensor produce 1024 pulses per revolution compared to 200 pulses per revolution for the standard E-Coder EP. This allowed for more precise fine-tuning when using maximum zoom in the spectrum.
E-Coder PLUS has been replaced by E-Coder 2.
SKU: E-Coder-Plus
