-
×
OM2000A+ HF & 6m 2kW Automatic Amplifier
1 × 7,322.26 $
Subtotal: 7,322.26 $
OM Power, Power Amplifiers
OM2000+ HF & 6m 2kW Power Amplifier
Availability:
Built on order, delivery time 2-3 weeks
Share this:
The OM2000+ linear amplifier is designed for all shortwave amateur bands from 1.8 to 29 MHz (including WARC – bands) plus 50 MHz and all modes. It is equipped with a ceramic tetrode FU-728F and delivers 2000 watt on HF and 1500 watt on 6 meter.
Reviews
WU2M – “This amp is a powerhouse!”
F8DQL – “It’s impressive!”
Built on order, delivery time 2-3 weeks.
4,841.74 $
Built on order, delivery time 2-3 weeks
unlimited available through backorder
Specification of OM2000+
| Frequency coverage: | Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz |
| Power output: | 2000+ W in SSB/CW on HF bands, 1500 W CW/SSB on 50 MHz 1500 W in RTTY |
| Input power: | 40 to 60 W for full output power |
| Input impedance: | 50 Ohm VSWR < 1.5 : 1 |
| Output amplification: | 15 dB |
| Output impedance: | 50 Ohm unbalanced |
| Maximum output SWR: | 2:1 |
| SWR protection: | Automatic switching to STBY when reflected power is 250W or higher |
| Intermodulation distortion: | 32 dBc |
| Suppression of harmonics: | min -50 dBc ( 30–54 MHz better than 70dBc) |
| Tube: | FU-728F ceramic tetrode |
| Cooling: | Centrifugal blower + axial blower |
| Power supply: | Switchable 220, 230 , 240 V – 50/60 Hz |
| Transformers: | 1 toroidal transformer 3 kVA |
| Protection circuits: | – SWR too high |
| – Anode current too high | |
| – Screen current too high | |
| – Grid current too high | |
| – Mistuning of power amplifier | |
| – Temperature to high | |
| – Soft start for fuse protection | |
| – “switch –on blocking “ at opened amplifier | |
| Indications: | – OLED display 4 x 20 character |
| – Analog 2 systems meter for forward and reflected power | |
| LED indicators: | – ON status |
| – STBY– standby | |
| – FAULT – warnings and faults indicator | |
| – ON AIR – amplifier in transmitting status | |
| Features: | – Antenna switch for 3 antennas |
| – Memory for faults and warning, easy maintenance | |
| – Automatic set-up anode current (BIAS ) – no need to manual adjust after changing the tube | |
| – Temperature controlled 2-speed centrifugal blower ( turbine ) + axial blower | |
| – Full QSK with silent vacuum relay | |
| – The smallest and lightest 2000W PA on the market | |
| Mechanical parameters: | 390mm x 195mm x 370mm (width x height x depth) |
| Weight: | 24 kg |
Based on 0 reviews
Be the first to review “OM2000+ HF & 6m 2kW Power Amplifier”
You must be logged in to post a review.
Related products
-
-
OM Power, Power Amplifiers
OM2501A 2.5kW Automatic Amplifier
The OM2501A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a one ceramic tetrode FU728F or GU84B (specify below) and delivers up to 2500+ watt on all HF bands.
Built on order, delivery time 2-3 weeks.
SKU: OM2501A -
OM Power, Power Amplifiers
OM4001A 4kW Automatic Amplifier
The OM4001A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a two ceramic tetrodes FU728F and delivers up to 4000+ watt on all HF bands.
Built on order, delivery time 2-3 weeks.
SKU: OM4001A -
OM Power, Power Amplifiers
OM 4000A Remote Control
Remote Control expands possibilities of using OM 4001A up to 10 meters away from your operating position. When needed it is also possible to connect the Remote Control unit to a LAN network and control over the internet it using a special software.
Delivery time 2-3 weeks.
SKU: OM4000AREM
There are no reviews yet.