Overview
The OM4001HF covers HF amateur bands within 1.8–29.7 MHz, including WARC. Two FU728F ceramic tetrodes deliver 4,000 W CW/SSB or 3,000 W RTTY, AM and FM.
Manual band, tune and load controls are accompanied by a colour touchscreen. Full QSK, fault and warning memory, automatic bias setup and three programmable axial-blower operating modes support everyday operation and maintenance.
Key features
- Two FU728F ceramic tetrodes with two 3 kVA toroidal transformers.
- Typically 40–70 W drive for full output and 17 dB gain.
- 109 mm [4.3 in] colour touchscreen and full QSK.
- Automatic bias setup following tube replacement.
- Centrifugal blower plus axial blower with three programmable modes.
Typical applications
HF CW and SSB stations requiring manual tuning, break-in CW operation, and RTTY, AM or FM at the corresponding 3,000 W rating.
Specifications
| Parameter | Specification |
|---|---|
| Frequency coverage | Amateur bands (1.8 – 29.7) MHz including WARC |
| Power output | 4,000 W CW/SSB; 3,000 W RTTY/AM/FM. |
| Input Power | Usually 40 to 70 W for full output power |
| Input Impedance | 50 Ω, VSWR < 1.5 : 1 |
| Power Gain | 17 dB |
| Output Impedance | 50 Ω unbalanced |
| Maximum Output SWR | 3:1 |
| SWR protection | Automatic switching to STBY, when reflected power is 350 W or higher |
| Intermodulation distortion | -32 dB below nominal output |
| Suppression of harmonics | < -50 dBc |
| Tubes | 2x FU728F ceramic tetrode |
| Cooler | Centrifugal blower + axial blower |
| Power supply | switchable voltages – 220/230/240 V for 50 Hz or 230/240/250 V for 60 Hz (or other primary voltages e.g. 200 V 50/60 Hz for Japan) |
| Transformers | 2 × 3 kVA toroidal transformers |
| Dimensions (W × H × D) | 485 × 200 × 455 mm [19.09 × 7.87 × 17.91 in] |
| Weight | 46 kg [101.4 lb] |
| Display | 109 mm [4.3 in] colour touchscreen |
Why choose OM4001HF?
- Dedicated manual tuning for HF amateur bands.
- Separate CW/SSB and RTTY/AM/FM power ratings.
- Full QSK supports break-in CW operation.
- Touchscreen monitoring and fault memory aid operation.
Owner feedback
“Tuning is very straightforward and easy.”
VA6SZ, 23 January 2026 — eHam owner review
Performance notes / setup guidance
Full output typically requires 40–70 W drive. Maximum output SWR is 3:1; reflected power of 350 W or more causes automatic standby.
The amplifier weighs 46 kg [101.4 lb]. Mains options are 220/230/240 V at 50 Hz or 230/240/250 V at 60 Hz. Use the matching supply setting.









