OM2501HF 2.5kW Amplifier
Made on order, delivery in 3-4 weeks.
Share this:
The linear amplifier OM2501HF is a manual tune designed for all short wave amateur bands from 1.8 till 29 MHz (including WARC) and all modes. It is equipped with a one ceramic tetrode FU728F or GU84B (specify below) and delivers up to 2500+ watt on all HF bands.
Built on order, delivery time 2-3 weeks.
5,245.02 $ – 5,817.20 $
OM2501HF Advantages
-
Full compatibility with
- – ICOM
- – YAESU
- – ELECRAFT
- – Ten-Tec Orion
- – Kenwood
- – Icom transceive protocol using by microHAM devices –CI-V output (MK II, MK2R, MK2R+, etc)
- – Flex Radio Series 6xxx
- – Apache Labs Anan
- RF sensitive Band and Frequency switching, for use with radios which do not have CAT
- Automatic switching between bands
- Automatic tuning with the band according to segments
- Automatic switching of band pass filter – BAND DATA output compatible with YAESU radios (BCD code)
- Automatic switching of the antenna switches – maximum number of antennas is 10, controlled by BCD output code
- Remote control via PC Windows Application
OM2501HF Specifications
Specification of OM2501HF:
| Frequency coverage: | Amateur Bands 1.8 – 29.7 MHz including WARC |
| Power output: | 2500W in SSB and CW on HF bands, 2000W in RTTY, AM and FM |
| Input Power: | Usually 30 to 60W for full Output Power |
| Input Impedance: | 50 Ohm, VSWR < 1.5 : 1 |
| Power Gain: | 17 dB |
| Output Impedance: | 50 Ohm unbalanced |
| Maximum Output SWR: | 3:1 |
| SWR protection: | Automatic switching to STBY, when reflected power is 350W or higher |
| Intermodulation distortion: | -32dB below nominal output |
| Suppression of harmonics: | < -50 dBc |
| Tubes: | 1x FU728F or GU84B Ceramic tetrode |
| Cooler: | Centrifugal blower + Axial blower |
| Power supply: | switchable voltages – 220/230/240V for 50Hz or 230/240/250V for 60Hz (or other primary voltages e.g. 200V 50/60Hz for Japan) |
| Transformers: | 2 pcs of toroidal transformer 2kVA |
| Dimensions: | 485 x 200 x 455mm (width x height x depth) |
| Weight: | 40 kg |
| Protection circuits: | – VSWR too high |
| – Anode current too high | |
| – Anode voltage error | |
| – Screen current too high | |
| – Screen voltage error | |
| – Grid current too high | |
| – Grid voltage error | |
| – Heating voltage error | |
| – Mistuning of PA | |
| – Temperature too high | |
| – Soft start for protecting your fuses | |
| – “switch-on blocking“ at opened amplifier | |
| Indications: | 4.3″ color touch screen display |
| Features: | High level of protection |
| Memory for faults and warnings, easy maintenance | |
| Automatic set-up anode current (BIAS) – no need to adjust manually after changing the tubes | |
| Three programmable working modes of the axial blower | |
| Full QSK operation | |
| Many operational parameters to display |
Optionally the OM2501HF can be ordered with a GU84B ceramic tetrode, please contact us for offer.
| Tube | FU-728F ceramic tetrode, GU84B ceramic tetrode |
|---|
Related products
-
-
OM Power, Power Amplifiers
OM2000+ HF & 6m 2kW Power Amplifier
The OM2000+ linear amplifier is designed for all shortwave amateur bands from 1.8 to 29 MHz (including WARC – bands) plus 50 MHz and all modes. It is equipped with a ceramic tetrode FU-728F and delivers 2000 watt on HF and 1500 watt on 6 meter.
Reviews
WU2M – “This amp is a powerhouse!”
F8DQL – “It’s impressive!”Built on order, delivery time 2-3 weeks.
SKU: OM2000+ -
OM Power, Power Amplifiers
OM4001HF 4kW HF Amplifier
The OM4001HF linear amplifier is designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a two ceramic tetrodes FU728F and delivers up to 4000+ watt on all HF bands.
Built on order, delivery time 2-3 weeks.
SKU: OM4001HF -
SDR Transceivers, Expert Electronics, Transceivers
MB1 PRIME High End DUC/DDC Transceiver
The MB1 transceiver is a game changer, it’s a transceiver and a PC in a single package. It has a classic design, developed over several decades, with the most advanced DUC/DDC SDR technologies – Direct Down Conversion (DDC) and Direct Up Conversion (DUC) and a fully featured high-end personal computer with an Intel Core i7 processor on board.
Latest production run includes an updated mother board, I7-9700 CPU, 16GB DDR4 RAM, 500 GB SSD. TX IMD3 has been improved with up to 7 dB! (See updates below colorised in red).
Scroll down to see the video presentation, specifications and to download a brochure.
Read our blog series about the MB1 here.
SKU: MB1P
