OM10C Power Combiner 10 kW
Allow for 2-3 weeks delivery time
Share this:
OM10C high power combiner is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power.
4,503.30 $
Allow for 2-3 weeks delivery time
OM10C SpecificationsÂ
| Frequency coverage: | 1.8 – 29.7 MHz continuous |
| Power rating: | 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to 5 kW at VSWR up to 2:1 |
| Input impedance: | 50 Ohm unbalanced, input UHF SO239 connector |
| SWR: | Less than 1,2 : 1 across band, input VSWR with 50 Ohm loads at the two splitter outputs: less than 1,2:1, 1,8-30MHz continuously (no tunings, no switching) |
| Output impedance: | 50 Ohm unbalanced, output 7/16“ connector |
| Insertion loss: | very low insertions loss, less than 0,3 dB |
| Indications: | 4.3″ color touch screen display |
| Mechanical parameters: | 165mm x 200mm x 350mm (width x height x depth) |
| Weight: | 8.1 kg |
| Weight | 10 kg |
|---|
Related products
-
OM Power, Power Amplifiers
OM2501HF 2.5kW Amplifier
The linear amplifier OM2501HF is a manual tune designed for all short wave amateur bands from 1.8 till 29 MHz (including WARC) and all modes. It is equipped with a one ceramic tetrode FU728F or GU84B (specify below) and delivers up to 2500+ watt on all HF bands.
Built on order, delivery time 2-3 weeks.
SKU: OM2501HF -
-
-
OM Power, Power Amplifiers
OM2501A 2.5kW Automatic Amplifier
The OM2501A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a one ceramic tetrode FU728F or GU84B (specify below) and delivers up to 2500+ watt on all HF bands.
Built on order, delivery time 2-3 weeks.
SKU: OM2501A
