
Introducing the Aurora™ Series—an all-new family of HF/6m transceivers featuring the world’s first truly integrated 500W SDR transmitter. Aurora creates a new category in amateur radio by removing the traditional boundaries between transceiver, amplifier, antenna tuner, and power supply.
What Is Aurora?
The FlexRadio Aurora Series is a high-performance HF transceiver delivering 500W output on the 160–10m HF bands and 200W on 6m. Unlike traditional radios that use a legacy RF exciter followed by a linear amplifier, Aurora uses an advanced transmitter architecture based on Polar Modulation (PM).
This integrated 500W transceiver with built-in automatic antenna tuner (ATU) offers major advantages for operators who value simplicity, efficiency, and clean station design. By combining multiple functions into one unit, Aurora reduces cabling, minimizes potential RFI issues, and simplifies station setup. Integration between the transmitter, ATU, and power system also enables faster tuning, improved protection, and smoother operation.
Aurora also delivers significant performance benefits over conventional transceivers paired with linear amplifiers. Polar modulation is far more efficient than traditional linear amplification, resulting in lower power consumption, reduced heat generation, and a much smaller heat sink. This reduces overall size and weight while improving operating efficiency. It represents one of the most important advances in amateur radio transmitter technology in decades.
By building on the proven architecture of the FLEX-6000 and FLEX-8000 series and maintaining compatibility with SmartSDR, Aurora provides a familiar yet powerful upgrade path for existing FlexRadio operators.
Aurora Key Differences Compared to FLEX-8000 Series
- 500W PEP on HF and 200W on 6m with 80% nominal efficiency
- Built-in 500W automatic antenna tuner
- Integrated AC/DC power supply (80–264 VAC, 47–63 Hz) with power factor > 0.94
FlexRadio unveiled the Aurora Series at Dayton Hamvention in Xenia, Ohio, held May 16–18, 2025.
Latest Aurora Update
A few AU-510 is available from stock, see our FlexRadio department for stock status.
Aurora is proving itself in real-world operation. It has been used successfully by U.S. DX operators and contesters, and it has recently been tested under demanding expedition conditions by the 3Y0K Bouvet Island Expedition and the CY0S Sable Island Expedition.
On April 6, it was announced that RED Cybersecurity testing for Aurora radios had been successfully completed. Shipment of EU pre-orders will begin as soon as CE authorization has been obtained.

AURORA Series 500 Watt Transceivers
-
FlexRadio, SDR Transceivers, Transceivers
FlexRadio AU-510 HF/6m 500W SDR Transceiver
The new FlexRadio AU-510 HF/6m transceiver features the world first truly integrated 500W SDR transmitter and up to 2 independent receivers with powerful SDR performance.
The Aurora Series defines a new category in amateur radio, eliminating the traditional boundaries between transceiver, amplifier, tuner, and power supply.
SKU: FLEX-AU-510 -
FlexRadio, SDR Transceivers, Transceivers
FlexRadio AU-510M HF/6m 500W SDR Transceiver
The new FlexRadio AU-510M HF/6m transceiver features the world first truly integrated 500W SDR transmitter, up to 2 independent receiver slices, combining powerful SDR performance with a built-in display and front panel controls for standalone use.
The Aurora Series defines a new category in amateur radio, eliminating the traditional boundaries between transceiver, amplifier, tuner, and power supply.
NOTE: Now accepting pre-orders for June delivery.
- ✔ Pre-order now – 250 EUR reservation fee
- ✔ Enter your order and check out with bank transfer
- ✔ You will receive instructions to transfer the reservation fee
- ✔ After checkout, you’ll receive an order confirmation
- ✔ When the product is available, we’ll contact you for final payment
- ✔ The 250 EUR fee will be deducted from your final payment
- ✔ Cancel your pre-order anytime – full refund of pre-order fee
SKU: FLEX-AU-510M -
FlexRadio, SDR Transceivers, Transceivers
FlexRadio AU-520 HF/6m 500W SDR Transceiver
The new FlexRadio AU-520 HF/6m transceiver features the world first truly integrated 500W SDR transmitter, 2 SCUs (Sampling Capture Units), up to 4 independent receivers, and 7th-order contest-grade preselectors for superior dynamic range, providing full SO2R support and diversity reception.
The Aurora Series defines a new category in amateur radio, eliminating the traditional boundaries between transceiver, amplifier, tuner, and power supply.
NOTE: Now accepting pre-orders for June delivery.
- ✔ Pre-order now – 250 EUR reservation fee
- ✔ Enter your order and check out with bank transfer
- ✔ You will receive instructions to transfer the reservation fee
- ✔ After checkout, you’ll receive an order confirmation
- ✔ When the product is available, we’ll contact you for final payment
- ✔ The 250 EUR fee will be deducted from your final payment
- ✔ Cancel your pre-order anytime – full refund of pre-order fee
SKU: FLEX-AU-520 -
FlexRadio, SDR Transceivers, Transceivers
FlexRadio AU-520M HF/6m 500W SDR Transceiver
The new FlexRadio AU-520M HF/6m transceiver features the world first truly integrated 500W SDR transmitter, 2 SCUs (Sampling Capture Units), up to 4 independent receivers, 7th-order contest-grade preselectors, outstanding dynamic range, providing full SO2R support and diversity reception and diversity reception—combined with a built-in display and controls for both remote and standalone operation.
The Aurora Series defines a new category in amateur radio, eliminating the traditional boundaries between transceiver, amplifier, tuner, and power supply.
NOTE: Now accepting pre-orders for June delivery.
- ✔ Pre-order now – 250 EUR reservation fee
- ✔ Enter your order and check out with bank transfer
- ✔ You will receive instructions to transfer the reservation fee
- ✔ After checkout, you’ll receive an order confirmation
- ✔ When the product is available, we’ll contact you for final payment
- ✔ The 250 EUR fee will be deducted from your final payment
- ✔ Cancel your pre-order anytime – full refund of pre-order fee
SKU: FLEX-AU-520M
Aurora presents one giant leap for hamkind.
Learn More About Aurora
- Behind-the-Scenes Introduction with Steve Hicks (N5AC) (Video)
- Tony, K1KP on the FlexRadio Aurora 500W HF Radio (Video)
- HRCC: What Is the Aurora from FlexRadio? (Video)
- Aurora Brochure
- Aurora FAQ
How to Order Aurora
A few AU-510 is available from stock, see our FlexRadio department for stock status.
Pre-orders are now accepted for the second EU delivery, estimated for July 2026. Reserve your 500W Aurora transceiver now to ensure you receive it in time for the upcoming DX and contest season.
- The pre-order fee is 250.00 € (or 250.00 $ / 2,500.00 SEK).
- Add the Aurora model of your choice to the cart.
- Check out using bank transfer as the payment method.
- Transfer the pre-order fee of 250.00 € (or 250.00 $ / 2,500.00 SEK).
- The pre-order fee will be deducted from the final price when the product becomes available.
- Your reservation is confirmed once the pre-order fee has been received.
Contact us today with any questions you might have ➜
Visit our FlexRadio Department ➜



