, , ,

micro2R (u2R) SO2R Controller

Availability:

Out of stock


micro2R (u2R) is an easy to use two-radio controller for everyday & contest use with a built-in WinKey 2 keyer.

361.64 $

  • EUR: 329.00 €
  • SEK: 3 756 kr

Out of stock

micro2Rā„¢ (u2Rā„¢)Ā is designed for any amateur with two transceivers and any control interface.Ā  It is feature rich but easy to install and operate, provides automatic or manual control of headphone audio and transmitter selection, and is compatible with the automatic modes of all of the most popular contest logging programs.

u2Rā„¢ is two radio controller for the single operator (SO2R controller).Ā  Install the control/driver software, connect your headphones, paddle, mic, footswitch and connect micro2Rā„¢ to your radios: you’re ready to go.Ā  The front panel is easy to understand with pushbutton controls for headphone audio and transmitter selection, speed control for the built-in WinKey 2 keyer, separate soundcard drive controls for each transmitter, an easy to use mix level control, and clearly visible LEDs to indicate manual or automatic operation, headphone audio source, and selected transmitter.

Unlike any other commercially available SO2R solution (except MK2Rā„¢ and MK2R+ā„¢ from microHAM), u2Rā„¢ uses either USB or LPT control, includes a proven WinKey 2 CW keyer, support for either electret or dynamic microphones, a UART compatible FSK port for each radio, and built-in support for the voice keyer capabilities of the most popular contesting software.

Features

General:

  • advanced (USB) or classic (LPT) control
  • proven microHAM Control Protocol
  • “Band Data” or Antenna Relay ports controlled by logger
  • two UART compatible FSK outputs
  • single foot switch operation
  • “selected transmitter” output for station automation
  • compatible with most standard Windows based programs
  • optically isolated USB and LPT inputs
  • compatible with LPT interface (CT, TR, NA)

Keying:

  • intelligent keying lockouts for both radios
  • hardware lockout for ā€last one winsā€ or ā€first one winsā€
  • programmable PTT Lead and Lag adjustable in 1ms steps
  • separately sequenced keying outputs for LNA bypass
  • separate PTT per transceiver with automatic focus control
  • support for VOX and CAT T/R switching command

CW:

  • integrated K1EL WinKey2ā„¢ with front panel speed control
  • front panel speed control.
  • nine (9) memories with auto-numbering
  • PS/2 keyboard/keypad support for direct CW with type ahead
  • PS/2 keyboard/keypad support for CW message playback
  • PS/2 keyboard/keypad CW works without computer connection

Voice:

  • front panel headset jacks
  • selectable electret bias (+8V) on mic tip or ring
  • wide range preamplifier supports both dynamic and electret mics
  • microphone switching allows “through the soundcard” orĀ “soundcard override” operation
  • transceiver PTT input for correct headphone switching in VOX
  • nine (9) memory software DVK

Audio:

  • front panel headphone jack
  • passive receive audio with selectable transformer isolation
  • support for second sound card for audio review
  • front panel control knob for left/right audio ā€mixā€ feature
  • dedicated controls for ā€classicā€ audio control (R1/BOTH/R2)

Other:

  • support for dual dual BCD band data or antenna relay outputs
  • integrated chokes and filters for maximum RFI immunity
  • Metal/Aluminum case, powder coated and silk screened
  • no time limit firmware/software upgrade on-line

Package contains:

micro2Rā„¢, USB cable, two stereo audio cables, 2.1mm x 5.5mm coaxial power connector, ground lug and CD-ROM containing the microHAM USB Device Router program, manual and example configurations.

Weight 1.5 kg

micro2R (u2R) Specifications

USB: USB 2.0 Full speed, USB 1.1 compatible

Power consumption:
USB ā€“ less than 100mA
Power supply ā€“ less than 250mA at 13.8V (max. 16V)

CW: 2 x open collector, max 30V/400mA
PTT: 2 x open collector, max 30V/400mA
PTT IN: 2 x active when closed to ground, max +25VDC only

ACC: TTL levels – 4mA Max.

LPT port: optically isolated, load less than 1 mA at 5V.

FSK: 2 x open collector, max 30V/400mA
FOCUS: open collector, max 30V/400mA – low = R1 selected

Foot Switch: active when closed to ground, max load: 1 mA at 5V
Phones: stereo output for headphones, 32 Ohm nominal

MIC: dynamic/electret selectable – max input 500mV
3dB bandwidth: 200 Hz – 6KHz typical
selectable 8V bias – 1mA max, off/tip/ring

SC Out: AC coupled input from soundcard – 32-600 Ohm, 4V p-p max.

SC In: AC coupled output to soundcard mic – 600 Ohm typ, 500mV P-P
3dB bandwidth: 200 Hz – 6KHz typical

Dimensions: W 232mm (9.125″) x H 44mm (1.75″) x D 101mm (4.125″)
Weight: 1.3 kg (1.875 lbs.)

Requirements:

Minimum – 1.6 GHz IBM PC compatible computer with Windows 2000, 512 MB RAM, Sound card, CD-ROM, USB1.1 port, Transceiver (x2), logger or control software (any)
Ā 
Recommended – 1.6 GHz PC with Windows XP or higher, 1 GB RAM, Sound Card, CD-ROM, USB2.0 port, Transceiver with computer port (x2), CW paddle, PS/2 keypad, logger or control software (any)

Note:Ā  Windows 98 (all versions) is not supported.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “micro2R (u2R) SO2R Controller”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.