,

ColibriDDC HF SDR Recveiver

Availability:

Out of stock


ColibriDDC is a small sized direct sampling SDR receiver designed to work on HF frequencies from 0.09 to 60 MHz. With the help of external filters ColibriDDC is capable to receive frequencies up to 800 MHz. It is controlled via LAN or can be connected to a Raspberry Pi3 to be remote controlled over the internet.

Scroll down for more information and a video presentation of ColibriDDC.

NEW! Andrew Barron ZL3DW review (English) >>
Radiouser magazine review (English) >>
Funk Amateur magazine review (German) >>
Fernando Duarte review (English) >>

719.36 $

  • EUR: 659.00 €
  • SEK: 7 648 kr

Out of stock

ColibriDDC Main capabilities

  • RX path based onĀ DDCĀ (Direct Down-Conversion) architecture
  • ExpertRemote systemĀ provides full remote control of the receiver
  • 2 software receivers (each up to 312 kHz) + SubRX for each of them (4 slices total) + independent widebandĀ Bandscope up to 62.5 MHz
  • ExtCTRLĀ connector to control external devices withĀ 7 powerful keysĀ with open collector
  • 100 Mbps Ethernet LANĀ interface provides fast and reliable connection to PC
  • TCI interfaceĀ for seamless connection with third-party software likeĀ SDCĀ (with its own Skimmer),Ā LogHX,Ā SWISSLOGĀ andĀ RUMlog, more are coming
  • RecordĀ IQ channelĀ with the bandwidth up toĀ 312 kHz
  • ReceivingĀ in undersampling modeĀ up to 800 MHzĀ (requires external BPF)
  • High-qualityĀ 24-bit audioā€“DACĀ installed for the smallest signal delays
  • Low power consumption, 5V 0.64A
  • External reference generator input 10 MHz
  • Small size W 65 x H 26 x L 125 mm

ColibriDDC Application field

  • Dual channel HF receiver
  • PanadapterĀ to classic transceivers
  • DualĀ bandĀ CW Skimmer (read application note)
  • Remote receiver for contests, DXing and other applications
  • Spectrum analyzer with wide spectrum scope up to 60 MHz

ColibriDDC Block Diagram

ColibriDDC-block-diagram

  • REF ā€“ connector to connect external 10 MHz generator
  • PLL ā€“ ADC clock frequency synthesizer
  • ATT ā€“ attenuator
  • MCU ā€“ microcontrol unit
  • Ant ā€“ connector to connect the HF band antenna
  • TCXO ā€“ inbuilt temperature compensated crystal oscillator
  • ADC ā€“ high speed analog-digital converter
  • DAC ā€“ audio digital-analog converter
  • EXT CTRL – connector for controlling the external devices
  • LPF ā€“ input low frequency filter (disabling)
  • FPGA – field programmable gate array
  • LAN ā€“ local network connector
  • PHONES ā€“ jack for connecting headphones
  • Front ā€“ front panel
  • Rear ā€“ rear panel

ExpertSDR2 System Requirements:

  • 2 or 4 core CPU Intel Core i3 or Core i5;
  • 8 GB RAM;
  • 40 GB free space on the HDD/SSD for the ExpertSDR2 and accompanied programs;
  • 17′ or bigger monitor;
  • video card with OpenGL 1.5 or higher;

ExpertSDR2 supports Windows 7-10 32/64 bit, Linux (Ubuntu/Kubuntu 18.04 x64), and macOS 10.14 Mojave and higher.

ColibriDDC Specifications

RF ADC, bit @ MHz 14 @ 125
ADC type LTC2261-14
RX Frequency range, MHz 0.1…60
Undersampling, MHz 0.1…800
Independent software receivers 2 + 2 SubRX
Sample rate, kHz @ bit 39; 78; 156; 312 @ 24
Bandscope, MHz 62
RX HF filters, MHz LPF: 60 MHz
BDR on HF, dB 110
BDR on VHF, dB 106
Sensitivity, uV 0.3
DR IMD3, not less dB 90
RMDR, dB n/s
ATT/Preamp, dB -20; 0
Local oscillator TCXO, MHz +/- ppm 20 +/- 0.5
External 10 MHz oscillator input +
Built-in audio codec, bit 24
RF input/output 1 (SMA)
PC interface LAN 100 Mbit
DC voltage range, V 4.5…5.5
Current consumption, A 0.64
Power consumption, W 3.2
Operating temperature, Ā°C/Ā°F 0…+50/ +32…+122
Dimensions L x W x H, cm/inches 12.5 x 6.5 x 2.6/ 4.41 x 2.52 x 0.94
Weight, kg/lbs 0.16/ 0.66

In the Box

  • ColibriDDC Receiver
  • Power source 5V 2A
  • Pigtail adapter SMA – PL259 (UHF)
  • LAN ā€“ cable

ColibriDDC Brochure

 

SKU: CDDC Categories: ,
Weight 0.5 kg
Dimensions 20.8 × 15.6 × 7 cm
RF ADC, bit @ MHz 14 @ 125
ADC type LTC2261-14
RX Frequency range, MHz 0.1…60
Undersampling, MHz 0.1…800
Independent software receivers 2 + 2 SubRX
Sample rate, kHz @ bit 39; 78; 156; 312 @ 24
Bandscope, MHz 62
RX HF filters, MHz LPF: 60 +/or optional BPF kit:Ā 8 x HF, ATT – 20dB, Preamp +10dB
BDR on HF, dB 110
BDR on VHF, dB 106
Sensitivity, uV 0.3
DR IMD3, not less dB 90
RMDR, dB n/s
ATT/Preamp, dB -20; 0
Local oscillator TCXO, MHz +/- ppm 20 +/- 0.5
External 10 MHz oscillator input +
Built-in audio codec, bit 24
RF input/output 1 (SMA)
PC interface LAN 100 Mbit
DC voltage range, V 4.5…5.5
Current consumption, A 0.64
Power consumption, W 3.2
Operating temperature, Ā°C/Ā°F 0…+50/ +32…+122
Dimensions L x W x H, cm/inches 12.5 x 6.5 x 2.6/ 4.41 x 2.52 x 0.94
Weight, kg/lbs 0.16/ 0.66

 

Specifications are subject to change without notice or obligation and specifications are only guaranteed within the amateur radio bands.

1,160.37 $ for 3 item(s)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ColibriDDC HF SDR Recveiver”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

There are no reviews yet.