LAB599 TX-500 SETTINGS BACKUP UTILITY


TRANSCEIVER CONNECTION:

1. Turn on the transceiver by pressing "POWER" key
2. Connect the CAT-USB adapter to the CAT socket on the TX-500 transceiver.
3. Run the "TRXSettings" program, in the "PORT" tab, select the COM port to which the transceiver is connected.

TO SAVE SETTINGS:

1. Press the "Read TRX" button to read the settings.
2. Save the settings to a file (.set) by clicking the "Safe File" button.

TO RESTORE SETTINGS:

1. Open the settings file (.set) by clicking the "Load File" button.
2. Press the "Write TRX" button to upload the settings to the transceiver.